D-Link DSL-2680 - Wireless Setup; Wireless Network Setup Wizard; Add Wireless Device with WPS (Wi-Fi Protected Setup) Wizard; Manual Wireless Network Setup

29D-Link DSL-2680 User Manual
Chapter 3 - Setup
Wireless Setup
The Router’s basic wireless and wireless network security settings are congured in the Wireless Settings conguration menu. To access this menu, click on the
Wireless Setup link in the left panel of the Setup menu directory. It is the rst page that appears when you successfully access the Web manager.
The Wireless Settings menu presents three options for conguration. Choose from
one of the three following conguration procedures:
1. Launch the Wireless Network Setup Wizard to congure the Network Name
(SSID) and WPA wireless network security. Click the Wireless Network Setup
Wizard button to begin. This option is recommended for most users.
Note: The Wireless Network Setup Wizard uses WPA wireless network
security. If you wish to congure WEP wireless network security, use Manual
Wireless Network Setup.
2. Use the WPS (Wi-Fi Protected Setup) Wizard to add individual wireless clients.
Click the Add Wireless Device with WPS button to use begin conguration
with WPS.
Note: Wireless clients added to using this method must support WPS.
3. Congure the SSID, channel and wireless network security settings manually.
Click the Manual Wireless Network Setup button to go to the general wireless
network settings menu.