D-Link DSL-2680 User Manual

40D-Link DSL-2680 User Manual
Chapter 3 - Setup
Manually Set Up Wireless Network Security - WEP
Wireless Encryption Protocol (WEP) encryption can be enabled for basic security and privacy. WEP encrypts the data portion of each frame transmitted from the
wireless adapter using one of the predened keys. The Router offers 64-bit, or 128-bit encryption with four keys available.
To congure WEP settings:
1. Select a WEP Key Length encryption level from the drop-down
menu, and enter the proper-length hexadecimal key in the
available entry elds. Up to 4 keys can be congured for use.
2. Choose the Default WEP Key from those just entered, used as
the active key.
3. Select an Authentication type, from the drop-down menu: Open
or Shared Key or Shared Key.
4. Click Apply Settings to use the new WEP settings and restart
the access point.

D-Link DSL-2680 Specifications

Power

input voltage	100-120V
input current	0.5A
frequency	50-60Hz
output voltage	12V
output current	0.5A

Data Transfer Rates

G.dmt full rate downstream	up to 8 Mbps
G.dmt full rate upstream	up to 1 Mbps
G.lite downstream	up to 1.5 Mbps
G.lite upstream	up to 512 Kbps
G.dmt.bis full rate downstream	up to 12 Mbps
G.dmt.bis full rate upstream	up to 1 Mbps
ADSL2+ full rate downstream	up to 24 Mbps
ADSL2+ full rate upstream	up to 1 Mbps

Wireless Transfer Rates

IEEE 802.11b rates	11, 5.5, 2, 1 Mbps
IEEE 802.11g rates	6, 9, 12, 18, 24, 36, 48, 54 Mbps
IEEE 802.11n rates 20MHz	6.5, 13, 19.5, 26, 39, 52, 58.5, 65 Mbps
IEEE 802.11n rates 40MHz	13.5, 27, 40.5, 54, 81, 108, 121.5, 135 Mbps

Media Interface

ADSL interface	RJ-11 connector
LAN interface	two RJ-45 ports
Ethernet connection type	10/100BASE-T