D-Link DSL-2790U - Wireless Basics Configuration; Wireless Network Settings

48D-Link DSL-2790U Wireless N300 ADSL2+ Modem Router User Manual
Section 4 - Conguration
Wireless Basics
Enable
Wireless:
Check this box to enable the router’s wireless functionality. The Wireless
On/Off button on the back of the DSL-2790U performs the same function.
Wireless
Network
Name (SSID):
Create a name for your wireless network using up to 32 characters.
The SSID is case-sensitive. Choose something for easy identification by
wireless clients.
Visibility
Status:
Visible networks conveniently advertise their existence to devices
looking for Wi-Fi networks to join. Invisible, or hidden, networks do not.
To join an invisible network users must manually input its SSID.
Note: Making a network Invisible is not a form of security alone.
Country: Select the country in which your router resides. This will automatically
configure the transmit power, frequencies, and available channels the
router’s wireless radios will use. This is based on the regulation provisions
set by each country.
Wireless
Channel:
Select the desired channel you wish your wireless network to operate on.
Auto is the default and recommended setting. The router will
automatically select the clearest wireless channel available. The current
channel in use is displayed to the right of the selection box.
Advanced users may wish to manually select a channel. This is typically
for areas with a large number of wireless networks nearby, in order to
improve wireless transmission.
802.11
Mode:
Select from the desired 802.11 mode of operation you desire.
802.11n auto is the default and recommended setting.
Bandwidth: Use the drop-down menu to select the channel bandwidth.
Auto or 20 MHz are the default and recommended settings.
Note: Not all wireless devices support 40 MHz bandwidth.
Click Apply when you are done.
WIRELESS NETWORK SETTINGS