D-Link DSL-2790U - Security Settings Configuration; WPS Setup; Wireless SSID Security; Wireless Security Mode

53D-Link DSL-2790U Wireless N300 ADSL2+ Modem Router User Manual
Section 4 - Conguration
Security Settings
This page allows you to manually congure the router’s wireless security settings. The page will change depending on the
selected authentication type.
WIRELESS SSID
WIRELESS SECURITY MODE
Network
Authentication:
Select the desired security type. The remaining settings on the page will
change depending on the type you select. Fill out these settings as required.
Select SSID: Select your wireless SSID.
WPS SETUP
Enable WPS: If you want to enable Wi-Fi Protected Setup (WPS), select Enable from the
drop-down menu.
Add Client: Select the desired WPS connection method, and click Add Enrollee to add
a new device using WPS. See Add Wireless Device with WPS on page 36
for more details.
Set WPS
AP Mode:
Select the desired WPS AP mode.
Device PIN: If applicable, enter the WPS PIN.
Click Apply when you are done.