D-Link DSL-2790U - Bridge Filtering; Bridge Filter Setup; Add Bridge Filter Rule

63D-Link DSL-2790U Wireless N300 ADSL2+ Modem Router User Manual
Section 4 - Conguration
Bridge Filtering
Bridge Filtering only eects ATM PVCs congured for Bridge mode. ALLOW means that all
MAC layer frames will be ALLOWED except those matching with any of the specied rules
in the following table. DENY means that all MAC layer frames will be DENIED except those
matching with any of the specied rules in the following table.
Set the Bridge Filtering Global Policy to either ALLOW or DENY the following rules. Click
Apply after changing the setting.
Enter the Bridge Filter rules.
ADD BRIDGE FILTER
The current active bridge lters will be listed here.
Click Add to add a new rule to the bridge lter list.
BRIDGE FILTER SETUP
Click Apply when you are done.