DWR-921 4G LTE Router
User Manual
Configuring via Web-based Interface
Parameter Description
Scanning period
Specify a period of time (in seconds) after which the router rescans
channels.
When you have configured the parameters, click the APPLY button.
To edit the settings of the basic wireless network, in the Wi-Fi Network section, change the
needed parameters and click the APPLY button.
Also you can create an additional wireless network. To do this, click the ADD WI-FI NETWORK
button. On the opened page, specify the relevant parameters.
Figure 118. Creating a wireless network.
Page 144 of 255
To Next Page
Loading...
