DWR-921 4G LTE Router
User Manual
Configuring via Web-based Interface
Parameter Description
Wi-Fi Network
Network name (SSID) A name for the wireless network.
Hide SSID
If the switch is moved to the right, other users cannot see your Wi-Fi
network. It is recommended not to hide the network in order to
simplify initial configuration of the wireless network.
BSSID
The unique identifier for this wireless network. You cannot change
the value of this parameter, it is determined in the device's internal
settings. The field is displayed in the settings of the existing wireless
network.
Max associated clients
The maximum number of devices connected to the wireless network.
When the value 0 is specified, the device does not limit the number
of connected clients.
Broadcast wireless
network
If the wireless network broadcasting is disabled, devices cannot
connect to the wireless network. Upon that DWR-921 can connect to
another access point as a wireless client.
To enable/disable broadcasting on a schedule, click the Set
schedule icon ( ). In the opened window, from the Rule drop-
down list, select the Create rule value to create a new schedule
(see the Schedule section, page 228) or select the Select an
existing one value to use the existing one. Existing schedules are
displayed in the Rule name drop-down list.
To enable broadcasting at the time specified in the schedule and
disable it at the other time, select the Enable wireless network
broadcasting value from the Action drop-down list and click the
SAVE button. When the wireless connection is disabled, the device
will not be able to enable broadcasting of this wireless network on
schedule.
To disable broadcasting at the time specified in the schedule and
enable it at the other time, select the Disable wireless network
broadcasting value from the Action drop-down list and click the
SAVE button.
To change or delete the schedule, click the Edit schedule icon
( ). In the opened window, change the parameters and click the
SAVE button or click the DELETE FROM SCHEDULE button.
If you created an additional network, you can configure, change or
delete a schedule for each network. To do this, click the button in the
line of the network.
Page 145 of 255
To Next Page
Loading...
