D-Link DWR-922

25D-Link DWR-922 User Manual
Section 4 - Conguration
Static IPv6
Enter the static IPv6 address of the router.
Enter the subnet prex length.
Enter the default gateway address.
Enter the primary and secondary DNS server addresses.
Enter the LAN (local) IPv6 address for the router.
Displays the router’s LAN link-local address.
Check to enable the autoconguration feature.
Select Stateful (DHCPv6), SLAAC + RDNSS, or SLAAC + Stateless
DHCPv6.
Enter the IPv6 address lifetime (in seconds).
Click Apply to save your settings, or Refresh to revert to your
previous settings.
IPv6 Address:
Subnet Prex
Length:
Default Gateway:
DNS Addresses:
LAN IPv6 Address:
LAN IPv6 Link-
Local Address:
Enable
Autoconguration:
Autoconguration
Type:
Router
Advertisement
Lifetime: