D-Link DWR-922

28D-Link DWR-922 User Manual
Section 4 - Conguration
Wi-Fi
Device List
This page displays a list of currently-connected wireless clients, and their
respective MAC addresses.
Wi-Fi Settings
Check this box to enable wireless access. When you enable this
option, the following parameters take eect.
Also known as the SSID (Service Set Identier), this is the name of
your Wireless Local Area Network (WLAN). Enter a name using up
to 32 alphanumeric characters. The SSID is case-sensitive.
Select the IEEE 802.11 standard used by your wireless clients.
Enabling this feature will allow the router to automatically scan for
the best wireless channel to use.
If Auto Channel Scan is disabled, select the desired channel here.
Enable Wireless:
Wireless
Network Name:
802.11 Mode:
Enable Auto
Channel Scan:
Wireless
Channel:
This page lets you set up your wireless network and choose a wireless security mode. Click Apply to save your settings, or Refresh to revert to your
previous settings.