D-Link DWR-922

39D-Link DWR-922 User Manual
Section 4 - Conguration
The device can be congured as a virtual server so that users can access services such as Web or FTP via the public (WAN) IP address of the router.
You can also allow the settings to run on a specied schedule.
This contains a list of pre-dened services. You can select a service,
select a rule ID, then click the Copy to button to copy the default
settings for that service to the specied rule ID.
Species which rule to copy the selected Well known service
settings to when you click the Copy to button.
Select a schedule to use and copy to the specied rule ID when
you click the Copy to button. You may select Always On or use
a specic schedule that you have dened. To create and edit
schedules, please refer to Schedules on page 60.
Well-known
Services:
ID:
Use schedule
rule:
VIRTUAL SERVERS LIST
This identies the rule.
Enter the public port(s) you want to open.
Enter the IP address and port of the computer on your local
network that you want to forward the Service Ports to.
Check the box to enable the specied rule.
Specify the schedule rule number. To create schedules, click on
the Add New Rule button. For further information on schedules,
please refer to Schedules on page 60.
Click Apply to save your settings, or Refresh to revert to your
previous settings.
ID:
Service Ports
Server IP: Port:
Enable:
Schedule Rule #:
Virtual Server