EasyManuals Logo

D-Link DWR-922 User Manual

D-Link DWR-922
109 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #51 background imageLoading...
Page #51 background image
47D-Link DWR-922 User Manual
Section 4 - Conguration
Check the box to enable the Universal Plug and Play (UPnP™)
feature. UPNP provides compatibility with various networking
equipment, software, and peripherals.
Select the box to allow the WAN port to be “pinged. Blocking WAN
pings may provide some extra security from hackers.
Click Apply to save your settings, or Refresh to revert to your
previous settings.
Advanced Network contains settings which can change the way the router handles certain types of trac. We recommend that you do not change
any of these settings unless you are already familiar with them or have been instructed to make the change by one of our support personnel.
Enable UPnP:
Enable WAN Ping
Respond:
Advanced Network

Other manuals for D-Link DWR-922

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the D-Link DWR-922 and is the answer not in the manual?

D-Link DWR-922 Specifications

Wireless Specifications IconWireless Specifications
LTE Band800 / 900 / 1800 / 2600 MHz
UMTS/HSDPA/HSUPA Band900 / 2100 MHz
Data Rates 802.11nUp to 300 Mbps
Data Rates 802.11g6 / 9 / 11 / 12 / 18 / 24 / 36 / 48 / 54 Mbps
Data Rates 802.11b1 / 2 / 5.5 / 11 Mbps
LTE UplinkUp to 50 Mbps
LTE DownlinkUp to 100 Mbps
Ports & Interfaces IconPorts & Interfaces
LAN PortsFour (RJ-45)
WAN PortOne (RJ-45)
Phone PortOne (RJ-11)
USIM SlotStandard 6-pin SIM card interface
Dimensions and Antenna IconDimensions and Antenna
Dimensions190 x 111.5 x 23.5 mm
Dimensions (inches)7.48 x 4.39 x 0.93 inches
AntennaTwo detachable 3G/4G antennas
Operating Environment IconOperating Environment
Operating Temperature0 to 40 ˚C
Operating Temperature (Fahrenheit)32 to 104 ˚F
Operating Humidity10% to 90% (Non-condensing)

Related product manuals