D-Link DWR-922

17D-Link DWR-922 User Manual
Section 4 - Conguration
Choose whether the DWR-922 should only use 4G networks, 3G
networks, or use Auto Mode to automatically select a network.
Select Auto-Detection to have the router automatically detect
the settings for your connection. Select Manual to enter the
details of your connection manually.
Fill in a name to identify the following 3G/4G conguration.
Select your country and service provider to automatically ll in
some of the required settings.
Fill in only if requested by ISP (optional).
Fill in only if requested by ISP (optional).
Re-type your password in this eld (optional).
Enter the number to be dialed.
Select PAP, CHAP, or Auto detection. The default authentication
method is Auto.
Enter the APN information (optional). Default is “ssi991.ssimicro.
com”
Enter the PIN associated with your SIM card.
Select Auto or Manual to determine whether the router should
reconnect to your 3G/4G network automatically or manually.
Prefer Service
Type:
Dial Up Prole:
Account/Prole
Name:
Country/
Telecom:
Username:
Password:
Verify Password:
Dialed Number:
Authentication:
APN:
Pin Code:
Reconnect
Mode:
4G LTE / 3G