D-Link DWR-922 - MAC Address Filter

43D-Link DWR-922 User Manual
Section 4 - Conguration
Tick this box to enable MAC Filtering.
Check the box to allow wireless and wired clients with C selected
to connect to this device. You can also select to allow or deny
connections from unspecied MAC addresses.
Check the box to allow wireless clients with A selected can
associate to the wireless LAN. You can also select to allow or deny
connections from unspecied MAC addresses.
MAC FILTERING RULES
This identies the rule.
Specify the MAC address of the computer to be ltered.
Specify the last section of the IP address.
If this box is ticked, the rule will follow the connection control
setting specied in MAC ltering settings specied above.
If this box is ticked, the rule will follow the association control
setting specied in MAC ltering settings specied above.
Click Apply to save your settings, or Refresh to revert to your
previous settings.
MAC Address
Control:
Connection
Control:
Association
Control:
ID:
MAC Address:
IP Address:
C:
A:
The MAC (Media Access Controller) Address Filter option is used to control network access based on the MAC address of the network adapter.
A MAC address is a unique ID assigned by the manufacturer of the network adapter. This feature can be congured to ALLOW or DENY network/
Internet access.
MAC Address Filter