D-Link DWR-922

53D-Link DWR-922 User Manual
Section 4 - Conguration
Displays your current rmware’s version.
Displays your current rmware’s release date.
After you have downloaded a new rmware, click Browse to
locate the rmware on your computer, then click Upload to start
the rmware upgrade.
Warning: You must use a wired connection to upload the rmware
le; do not use a wireless connection. During the upgrade
process, do not power o your computer or router, and
do not refresh the browser window until the upgrade is
complete.
If the rmware you want to install is not an ocial D-Link release,
you will need to check this box.
Warning: Unocial rmware is not supported, and may cause
damage to your device. Use of unocial rmware is at
your own risk.
Here, you can upgrade the firmware of your router. Make sure the firmware you want to use is on the local hard drive of the
computer and then click Browse to upload the file. You can check for and download firmware updates at the D-Link support site at
http://support.dlink.com.
Current Firmware
Version:
Current Firmware
Date:
Upload:
Accept Unocial
Firmware:
Firmware Upgrade