D-Link DWR-922

51D-Link DWR-922 User Manual
Section 4 - Conguration
Enter and conrm the password that the admin account will use to
access the router’s management interface.
Tick this check box to enable remote management. Remote
management allows the DWR-922 to be congured over the
Internet through a web browser. A username and password will
still be required to access the web-management interface.
Enter the Internet IP address of the PC that has access to the
broadband router. If you enter an asterisk (*) in this eld, then
anyone will be able to access the router. Adding an asterisk (*) into
this eld could present a security risk and is not recommended.
This is the port number used to access the router. 8080 is the port
usually used for the web-management interface.
Click Apply to save your settings, or Refresh to revert to your
previous settings.
The Admin page allows you to change the Administrator password and enable Remote Management. The admin has read/write access while users
only have read-only access. Only the admin has the ability to change both admin and user account passwords.
Admin Password:
Remote
Management:
IP Allowed to
Access:
Port:
Administration