D-Link G530 - Page 44

39D-Link G530 User Manual
Section 3 - Conguration
Advanced Settings... - Address Autoconguration Settings
Enable Automatic
IPv6 Address
Assignment:
Enable or disable the Automatic IPv6 Address Assignment
feature.
Enable Automatic
DHCP-PD in LAN:
If DHCP-PD is enabled in the previous LAN IPv6 Address
Settings, enable or disable automatic DHCP-PD for other IPv6
routers connected to the LAN interface.
Autoconguration
Type:
Select SLAAC+RDNSS, SLAAC+Stateless DHCP, or Stateful
DHCPv6.
If you select
SLAAC+RDNSS or SLAAC+Stateless DHCP as the Autoconguration Type:
Router
Advertisement
Lifetime:
Enter the router advertisement lifetime (in minutes). The
default is 30 minutes.
If you select
Stateful DHCPv6 as the Autoconguration Type:
IPv6 Address
Range (Start):
Enter the start IPv6 address for the DHCP server’s IPv6
assignment.
IPv6 Address
Range (End):
Enter the end IPv6 address for the DHCP server’s IPv6
assignment.
IPv6 Address Lifetime: If DHCP-PD is disabled in the previous LAN IPv6 Address
Settings, enter the IP address retention period in minutes. The
default is 10080 minutes.