Print Server Administration User’s Guide
Appendix: Telnet Interface Administration
115
[TCP/IP Configuration]
1 - IP Address <168.8.100.52>
2 - Subnet Mask <255.255.0.0>
3 - Default Gateway <168.8.100.254>
4 - SNMP Community
5 - SNMP Traps
0 - Return to Main Menu
Enter Selection:
2.
To change the IP address, local subnet mask, or default
gateway, choose the appropriate menu item. The print server
will prompt you for a new value for the setting. Enter the
new value and press Enter.
To change the SNMP community names, choose the appropriate
menu item. The print server will display the SNMP Community
menu:
[SNMP Community]
1 - Commumity 1 Name <public>
2 - Community 1 Access <Read Only>
3 - Commumity 2 Name <>
4 - Community 2 Access <Read Only>
5 - Commumity 3 Name <>
6 - Community 3 Access <Read Only>
0 - Return to TCP/IP Menu
Enter Selection:
For each of the three community name “slots” that the print
server supports, you can set the community name and the level
of access (read-only or read/write) that requests using that
community name have. SNMP-compatible Network
Management System (NMS) stations can use the community
To Next Page
Loading...
Need help?
General
