D-Link X-STACK DES-3200 SERIES - Page 325

xStack
®
DES-3200 Series Layer 2 Managed Fast Ethernet Switch CLI Reference Guide
321
Example
To set the maximum number of DHCP IPv4 snooping entries that ports 1–3 can learned to 10:
DES-3200-28P:admin#config address_binding dhcp_snoop max_entry ports 1-3 limit
10.
Command: config address_binding dhcp_snoop max_entry ports 1-3 limit 10.
Success.
DES-3200-28P:admin#
31-15 enable address_binding trap_log
Description
This command is used to send traps and logs when the IMPB module detects an illegal IP and
MAC address.
Format
enable address_binding trap_log
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To enable the IMPB traps and logs:
DES-3200-28P:admin#enable address_binding trap_log
Command: enable address_binding trap_log
Success.
DES-3200-28P:admin#
31-16 disable address_binding trap_log
Description
This command is used to disable the IMPB traps and logs.
Format
disable address_binding trap_log