D-Link X-STACK DES-3200 SERIES - Page 326

xStack
®
DES-3200 Series Layer 2 Managed Fast Ethernet Switch CLI Reference Guide
322
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To disable IMPB traps and logs:
DES-3200-28P:admin#disable address_binding trap_log
Command: disable address_binding trap_log
Success.
DES-3200-28P:admin#
31-17 config address_binding recover_learning
Description
This command is used to recover IMPB checking.
Format
config address_binding recover_learning ports [<portlist> | all]
Parameters
ports - Specify the list of ports that need to recover the IMPB check.
<portlist> - Enter the list of port used here.
all - Specify that all the ports will be used.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To recover IMPB checking for ports 6 to 7:
DES-3200-28P:admin#config address_binding recover_learning ports 6-7
Command: config address_binding recover_learning ports 6-7
Success.
DES-3200-28P:admin#