D-Link xStack DES-3200 Series - Page 115

xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Manual
11
0
show stp
Used to displ
ay the Switch’s current STP configuration.
Purpose
sho
w stp
Syntax
This
command is used to display the Switch’s current STP configuration.
Description
Non
e
Parameters
Non
e.
Restrictions
Example usage:
To display the status of STP on the Switch:
Status 1: STP enabled with STP compatible version
DES-3200-28:4#show stp
Command: show stp
STP Bridge Global Settings
---------------------------
STP Status : Enabled
STP Version : STP compatible
Max Age : 20
Hello Time : 2
Forward Delay : 15
Max Hops : 20
TX Hold Count : 6
Forwarding BPDU : Enabled
DES-3200-28:4#