D-Link xStack DES-3200 Series - Asymmetric Vlan Commands

xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Manual
33
1
40
ASYMMETRIC VLAN COMMANDS
The Asymmetric VLAN commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the
following table:
Command Parameters
enable asymmetric_vlan
disable asymmetric_vlan
show asymmetric_vlan
Each command is listed, in detail, in the following sections:
enable asymmetric_vlan
Used to ena
ble asymmetric VLANs on the Switch.
Purpose
enabl
e asymmetric_vlan
Syntax
This
command is used to enable the asymmetric VLAN function on
the Switch
Description
Non
e.
Parameters
Only Administrator-level users
can issue this command.
Restrictions
Example usage:
To enable asymmetric VLANs:
DES-3200-28:4#enable asymmetric_vlan
Command: enable asymmetric_vlan
Success.
DES-3200-28:4#
disable asymmetric_vlan
Used to disab
le asymmetric VLANs on the Switch.
Purpose
disa
ble asymmetric_vlan
Syntax
This
command is used to disable the asymmetric VLAN function on
the Switch
Description
Non
e.
Parameters
Only Administrator-level users
can issue this command.
Restrictions
Example usage:
To disable asymmetric VLANs: