D-Link xStack DES-3200 Series - Mac-Based Vlan Commands

xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Manual
40
8
49
MAC-BASED VLAN COMMANDS
The MAC-based VLAN commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the
following table:
Command Parameters
create mac_based_vlan mac_address <macaddr> vlan <vlan_name 32>
delete mac_based_vlan {mac_address <macaddr> vlan <vlan_name 32>}
show mac_based_vlan {mac <macaddr> | vlan <vlan_name 32>}
Each command is listed, in detail, in the following sections.