D-Link xStack DES-3200 Series

xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Manual
43
4
53
TECHNICAL SUPPORT COMMANDS
The Technical Support commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the
following table:
Command Parameters
show tech_support
upload
tech_support_toTFTP
<ipaddr> <path_filename 64>
Each command is listed, in detail, in the following sections:
show tech_support
Used to sh
ow the information for technical support.
Purpose
sho
w tech_support
Syntax
This
command is especially used by the technical support personnel to
dump the device’s overall operation information. The information is
project dependent and includes the following information.
Description
Basic System information
system log
Running configuration
Layer 1 information
Layer 2 information
Layer 3 information
Application
OS status
Non
e.
Parameters
Only Administrator-level users
can issue this command.
Restrictions
Example usage:
To display technical support information on the Switch: