D-Link xStack DES-3200 Series - Page 121

xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Manual
11
6
create fdb
Used to creat
e a static entry in the unicast MAC address forwarding
table (database).
Purpose
cre
ate fdb <vlan_name 32> <macaddr> port <port>
Syntax
This
command is used to make an entry in the Switch’s unicast MAC
address forwarding database.
Description
Parameters
<vlan_name 32>  The name of the VLAN on which the MAC
address resides.
<macaddr>  The MAC address that will be added to the forwarding
table.
port <port>  The port number corresponding to the MAC destination
address. The Switch will always forward traffic to the specified
device through this port.
Only Administrator-level users
can issue this command.
Restrictions
Example usage:
To create a unicast MAC FDB entry:
DES-3200-28:4#create fdb default 00-00-00-00-01-02 port 5
Command: create fdb default 00-00-00-00-01-02 port 5
Success.
DES-3200-28:4#
create multicast_fdb
Used to creat
e a static entry in the multicast MAC address
forwarding table (database)
Purpose
cre
ate multicast_fdb <vlan_name 32> <macaddr>
Syntax
This
command is used to make an entry in the Switch’s multicast
MAC address forwarding database.
Description
Parameters
<vlan_name 32>  The name of the VLAN on which the MAC
address resides.
<macaddr>  The MAC address that will be added to the forwarding
table.
Only Administrator-level users
can issue this command.
Restrictions
Example usage:
To create a multicast MAC forwarding entry:
DES-3200-28:4#create multicast_fdb default 01-00-00-00-00-01
Command: create multicast_fdb default 01-00-00-00-00-01
Success.
DES-3200-28:4#