xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Manual
8
{braces}
Enclo
ses an optional value or set of optional arguments.
Purpose
reset {[co
nfig | system]} {force_agree}
Syntax
In the first part of the above syntax example, use
rs have the option to
specify config or system. It is not necessary to specify either optional value,
however the effect of the system reset is dependent on which, if any, value
is specified. Therefore, with this example there are three possible outcomes
of performing a system reset. Do not type the braces.
Description
reset config
Example command
(parentheses)
Indicate
s at least one or more of the values or arguments in the preceding
syntax enclosed by braces must be specified.
Purpose
config d
hcp_relay {hops <value 1-16> | time <sec 0-65535>}(1)
Syntax
In the above syntax example, use
rs have the option to specify hops or time or
both of them. The "(1)" following the set of braces indicates at least one
argument or value within the braces must be specified. Do not type the
parentheses.
Description
config d
hcp_relay hops 3
Example
command
Line Editing Key Usage
Delete
s the character under the cursor and then shifts the remaining
characters in the line to the left.
Delete
Delete
s the character to the left of the cursor and then shifts the remaining
characters in the line to the left.
Backspace
Toggle on and off. When toggled on, inserts text and shifts previous text to
the right.
Insert or Ctrl+R
Moves
the cursor to the left.
Left Arrow
Moves
the cursor to the right.
Right Arrow
Rep
eats the previously entered command. Each time the up arrow is
pressed, the command previous to that displayed appears. This way it is
possible to review the command history for the current session. Use the
down arrow to progress sequentially forward through the command history
list.
Up Arrow
The do
wn arrow will display the next command in the command history
entered in the current session. This displays each command sequentially as
it was entered. Use the up arrow to review previous commands.
Down Arrow
Shifts
the cursor to the next field to the left.
Tab
To Next Page
Loading...
Need help?
General
