xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Manual
11
enable password encryption
Used to ena
ble password encryption on a user account.
Purpose
enabl
e password encryption
Syntax
The user a
ccount configuration information will be stored in the
configuration file, and can be applied to the system at a time in the
future. If the password encryption is enabled, the password will be in
encrypted form. If password encryption is disabled and the user
specifies the password in encrypted form, or if the password has
been converted to encrypted form by the last enabled password
encryption command, the password will still be in encrypted form. It
can not revert back to plain text.
Description
Non
e.
Parameters
Only Administrator-level users
can issue this command.
Restrictions
Example usage:
To enable password encryption on the Switch.
DES-3200-28:4#enable password encryption
Command: enable password encryption
Success.
DES-3200-28:4#
disable password encryption
Used to disab
le password encryption on a user account.
Purpose
disa
ble password encryption
Syntax
The user a
ccount configuration information will be stored in the
configuration file, and can be applied to the system at a time in the
future. If the password encryption is enabled, the password will be in
encrypted form. If password encryption is disabled and the user
specifies the password in encrypted form, or if the password has
been converted to encrypted form by the last enabled password
encryption command, the password will still be in encrypted form. It
can not revert back to plain text.
Description
Non
e.
Parameters
Only Administrator-level users
can issue this command.
Restrictions
Example usage:
To disable password encryption on the Switch.
DES-3200-28:4#disable password encryption
Command: disable password encryption
Success.
DES-3200-28:4#
To Next Page
Loading...
Need help?
General
