D-Link xStack DES-3200 Series User Manual

xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Manual
20
9
show 802.1x user
Used to displ
ay the 802.1X user accounts on the Switch.
Purpose
sho
w 802.1x user
Syntax
This
command is used to display the 802.1X Port-based or Host-based
Network Access control local users currently configured on the Switch.
Description
Non
e.
Parameters
Non
e.
Restrictions
Example usage:
To view 802.1X users currently configured on the Switch:
DES-3200-28:4#show 802.1x user
Command: show 802.1x user
Index UserName
---- ------------
1 ctsnow
Total Entries: 1
DES-3200-28:4#
delete 802.1x user
Used to delet
e an 802.1X user account on the Switch.
Purpose
delete 80
2.1x user <username 15>
Syntax
This
command is used to delete the 802.1X Port-based or Host-
based Network Access control local users currently configured on the
Switch.
Description
Parameters
<username 15>  A username can be as many as 15 alphanumeric
characters.
Only Administrator-level users
can issue this command.
Restrictions
Example usage:
To delete 802.1X users:
DES-3200-28:4#delete 802.1x user ctsnow
Command: delete 802.1x user ctsnow
Success.
DES-3200-28:4#

D-Link xStack DES-3200 Series Specifications

General

Managed	Yes
Layer	Layer 2
MAC Address Table Size	8K
Quality of Service (QoS)	802.1p
Security Features	ACL, 802.1X, Port Security
Jumbo Frame Support	Up to 9KB
Dimensions	Varies by model
Weight	Varies by model
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C
Standards Compliance	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z, IEEE 802.3x, IEEE 802.1D, IEEE 802.1w, IEEE 802.1s, IEEE 802.1Q, IEEE 802.1p
Forwarding Rate	13.1 Mpps (48-port)