D-Link xStack DES-3200 Series User Manual

xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Manual
23
0
config safeguard_engine
packets, until the storm has subsided.
fuzzy  If selected, this function will instruct the Switch to minimize the IP
and ARP traffic flow to the CPU by dynamically allotting an even bandwidth
to all traffic flows.
Only Administrator-level users
can issue this command.
Restrictions
Example usage:
To configure the safeguard engine for the Switch:
DES-3200-28:4#config safeguard_engine state enable utilization rising 45
Command: config safeguard_engine state enable utilization rising 45
Success.
DES-3200-28:4#
show safeguard_engine
Used to displ
ay current Safeguard Engine settings.
Purpose
sho
w safeguard_engine
Syntax
This
command is used to list the current status and type of the Safeguard
Engine settings currently configured.
Description
Non
e.
Parameters
Non
e.
Restrictions
Example usage:
To display the safeguard engine status:
DES-3200-28:4#show safeguard_engine
Command: show safeguard_engine
Safeguard Engine State : Disabled
Safeguard Engine Current Status : Normal mode
=======================================================
CPU Utilization Information:
Rising Threshold : 30%
Falling Threshold : 20%
Trap/Log State : Disabled
Mode : Fuzzy
DES-3200-28:4#

D-Link xStack DES-3200 Series Specifications

General

Managed	Yes
Layer	Layer 2
MAC Address Table Size	8K
Quality of Service (QoS)	802.1p
Security Features	ACL, 802.1X, Port Security
Jumbo Frame Support	Up to 9KB
Dimensions	Varies by model
Weight	Varies by model
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C
Standards Compliance	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z, IEEE 802.3x, IEEE 802.1D, IEEE 802.1w, IEEE 802.1s, IEEE 802.1Q, IEEE 802.1p
Forwarding Rate	13.1 Mpps (48-port)