D-Link xStack DES-3200 Series User Manual

xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Manual
23
2
show traffic_segmentation
Used to displ
ay the current traffic segmentation configuration on the
Switch.
Purpose
sho
w traffic_segmentation {<portlist>}
Syntax
This
command is used to display the current traffic segmentation
configuration on the Switch.
Description
Parameters
<portlist>  Specifies a port or range of ports for which the current
traffic segmentation configuration on the Switch will be displayed.
The po
rt lists for segmentation and the forward list must be on the
same Switch.
Restrictions
Example usage:
To display the current traffic segmentation configuration on the Switch:
DES-3200-28:4#show traffic_segmentation
Command: show traffic_segmentation
Traffic Segmentation Table
Port Forward Portlist
---- ----------------------------
1 1-28
2 1-28
3 1-28
4 1-28
5 1-28
6 1-28
7 1-28
8 1-28
9 1-28
10 1-28
11 1-28
12 1-28
13 1-28
14 1-28
15 1-28
16 1-28
17 1-28
18 1-28
CTRL+C ESC q Quit SPACE n Next Page ENTER Next Entry a All

D-Link xStack DES-3200 Series Specifications

General

Managed	Yes
Layer	Layer 2
MAC Address Table Size	8K
Quality of Service (QoS)	802.1p
Security Features	ACL, 802.1X, Port Security
Jumbo Frame Support	Up to 9KB
Dimensions	Varies by model
Weight	Varies by model
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C
Standards Compliance	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z, IEEE 802.3x, IEEE 802.1D, IEEE 802.1w, IEEE 802.1s, IEEE 802.1Q, IEEE 802.1p
Forwarding Rate	13.1 Mpps (48-port)