D-Link xStack DES-3200 Series User Manual

xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Manual
25
3
show mac_notification
Used to displ
ay the Switch’s MAC address table notification global settings.
Purpose
s
how mac_notification
Syntax
This
command is used to display the Switch’s MAC address table
notification global settings.
Description
Non
e.
Parameters
Non
e.
Restrictions
Example usage:
To view the Switch’s MAC address table notification global settings:
DES-3200-28:4#show mac_notification
Command: show mac_notification
Global Mac Notification Settings
State : Enabled
Interval : 1
History Size : 1
DES-3200-28:4#
show mac_notification ports
Used to displ
ay the Switch’s MAC address table notification status settings.
Purpose
sho
w mac_notification ports {<portlist>}
Syntax
This
command is used to display the Switch’s MAC address table
notification status settings.
Description
Parameters
<portlist>  Specify a port or group of ports to be viewed.
Entering this command without the parameter will display the MAC
notification table for all ports.
Non
e.
Restrictions
Example usage:
To display all port’s MAC address table notification status settings:

D-Link xStack DES-3200 Series Specifications

General

Managed	Yes
Layer	Layer 2
MAC Address Table Size	8K
Quality of Service (QoS)	802.1p
Security Features	ACL, 802.1X, Port Security
Jumbo Frame Support	Up to 9KB
Dimensions	Varies by model
Weight	Varies by model
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C
Standards Compliance	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z, IEEE 802.3x, IEEE 802.1D, IEEE 802.1w, IEEE 802.1s, IEEE 802.1Q, IEEE 802.1p
Forwarding Rate	13.1 Mpps (48-port)