D-Link xStack DES-3200 Series

xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Manual
27
3
config authen server_group
Only Administrator-level users
can issue this command.
Restrictions
Example usage:
To add an authentication host to server group “group_1”:
DES-3200-28:4# config authen server
_
group group
_
1 add server
_
host
10.1.1.121 protocol tacacs+
Command: config authen server
_
group group
_
1 add server
_
host 10.1.1.121
protocol tacacs+
Success.
DES-3200-28:4#
delete authen server_group
Used to delet
e a user-defined authentication server group.
Purpose
delete auth
en server_group <string 15>
Syntax
This
command is used to delete an authentication server group.
Description
Parameters
<string 15>  Enter an alphanumeric string of up to 15 characters to
define the previously created server group to be deleted.
Only Administrator-level users
can issue this command.
Restrictions
Example usage:
To delete the server group “group_1”:
DES-3200-28:4#delete authen server_group group_1
Command: delete authen server_group group_1
Success.
DES-3200-28:4#
show authen server_group
Used to view
authentication server groups on the Switch.
Purpose
sho
w authen server_group <string 15>
Syntax
This
command is used to display authentication server groups
currently configured on the Switch.
Description
This command will display the following fields:
Group Name  The name of the server group currently configured on
the Switch, including built in groups and user defined groups.
IP Address  The IP address of the server host.
Protocol  The authentication protocol used by the server host.
Parameters
<string 15>  Enter an alphanumeric string of up to 15 characters to
define the previously created server group to be viewed.
Entering this command without the <string> parameter will display all
authentication server groups on the Switch.