D-Link xStack DES-3200 Series - Page 294

xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Manual
28
9
disable ssl
To disa
ble the SSL function on the Switch.
Purpose
disa
ble ssl {ciphersuite {RSA_with_RC4_128_MD5 |
RSA_with_3DES_EDE_CBC_SHA |
DHE_DSS_with_3DES_EDE_CBC_SHA |
RSA_EXPORT_with_RC4_40_MD5} (1) }
Syntax
This
command is used to disable SSL on the Switch and can be used to
disable any one or combination of listed ciphersuites on the Switch.
Description
ciph
ersuite - A security string that determines the exact cryptographic
parameters, specific encryption algorithms and key sizes to be used for
an authentication session. The user may choose any combination of the
following:
Parameters
RSA_with_RC4_128_MD5 – This ciphersuite combines the RSA key
exchange, stream cipher RC4 encryption with 128-bit keys and
the MD5 Hash Algorithm.
RSA_with_3DES_EDE_CBC_SHA  This ciphersuite combines the
RSA key exchange, CBC Block Cipher 3DES_EDE encryption
and the SHA Hash Algorithm.
DHE_DSS_with_3DES_EDE_CBC_SHA  This ciphersuite
combines the DSA Diffie Hellman key exchange, CBC Block
Cipher 3DES_EDE encryption and SHA Hash Algorithm.
RSA_EXPORT_with_RC4_40_MD5  This ciphersuite combines the
RSA Export key exchange, stream cipher RC4 encryption with
40-bit keys.
Only Administrator-level users
can issue this command.
Restrictions
Example usage:
To disable the SSL status on the Switch:
DES-3200-28:4#disable ssl
Command: disable ssl
Success.
DES-3200-28:4#
To disable ciphersuite RSA_EXPORT_with_RC4_40_MD5 only:
DES-3200-28:4#disable ssl ciphersuite RSA_EXPORT_with_RC4_40_MD5
Command: disable ssl ciphersuite RSA_EXPORT_with_RC4_40_MD5
Success.
DES-3200-28:4#