D-Link xStack DES-3200 Series - Page 307

xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Manual
30
2
download sim
Used to do
wnload firmware or configuration file to an indicated device.
Purpose
download sim
_ms [firmware_from_tftp | configuration_from_tftp]
<ipaddr> <path_filename> [members <mslist 1-32> | all]
Syntax
This
command is used to download a firmware file or configuration file to
a specified device from a TFTP server.
Description
firmware – S
pecify this parameter to download firmware to members of a
SIM group.
Parameters
configuration  Specify this parameter to download a switch
configuration to members of a SIM group.
<ipaddr> – Enter the IP address of the TFTP server.
<path_filename> – Enter the path and the filename of the firmware or
configuration on the TFTP server.
members – Enter this parameter to specify the members to which the
user prefers to download firmware or switch configuration files. The user
may specify a member or members by adding one of the following:
<mslist>  Enter a value, or values to specify which members of the SIM
group will receive the firmware or switch configuration.
all – Add this parameter to specify all members of the SIM group will
receive the firmware or switch configuration.
Only Administrator-level users
can issue this command.
Restrictions
Example usage:
To download firmware:
DES-3200-28:4#download sim_ms firm
w
are
_
from
_
tftp 10.53.13.94 c:/des3200.had
all
Command: download sim_ms firmware_from_tftp 10.53.13.94 c:/des3200.had all
This device is updating firmware. Please wait several minutes...
Download Status :
ID MAC Address Result
--- ----------------- ----------------
1 00-36-28-10-35-00 Success
DES-3200-28:4#