D-Link xStack DES-3200 Series - Page 32

xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Manual
27
config terminal_line
Used to co
nfigure the number of rows which can be displayed on a
screen.
Purpose
config termin
al_line [ default | <value 20-80>]
Syntax
This
command is used to configure the number of rows which can be
displayed on a screen. The default value is 24.
Description
Non
e.
Parameters
Only Administrator-level users
can issue this command.
Restrictions
Example usage:
To configure the terminal line to display 30 rows:
DES-3200-28:4#config terminal_line 30
Command: config terminal_line 30
Success.
DES-3200-28:4#
show terminal_line
Used to sh
ow the number of rows which can be displayed on the
screen.
Purpose
s
how terminal_line
Syntax
This
command is used to show the number of rows which can be
displayed on the screen.
Description
Non
e.
Parameters
Non
e.
Restrictions
Example usage:
To show the current number of rows that can be displayed:
DES-3200-28:4#show terminal_line
Command: show terminal_line
Terminal Line : 24 (Default)
DES-3200-28:4#