xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Manual
34
5
enable igmp_snooping multicast_vlan
Used to ena
ble the multicast VLAN function.
Purpose
enabl
e igmp_snooping multicast_vlan
Syntax
This
command is used to control the multicast VLAN function. The
ISM VLAN will take effect when IGMP snooping multicast VLAN is
enabled. By default, the multicast VLAN is in a disabled state.
Description
Non
e.
Parameters
Only Administrator-level users
can issue this command.
Restrictions
Example usage:
To enable an IGMP snoop multicast VLAN:
DES-3200-28:4# enable igmp_snooping multicast_vlan
Command: enable igmp_snooping multicast_vlan
Success.
DES-3200-28:4#
disable igmp_snooping multicast_vlan
Used to disab
le the multicast VLAN function.
Purpose
disa
ble igmp_snooping multicast_vlan
Syntax
This
command is used to disable the multicast VLAN function. By
default, the multicast VLAN is in a disabled state.
Description
Non
e.
Parameters
Only Administrator-level users
can issue this command.
Restrictions
Example usage:
To enable IGMP snoop multicast VLAN:
DES-3200-28:4# disable igmp_snooping multicast_vlan
Command: disable igmp_snooping multicast_vlan
Success.
DES-3200-28:4#
show igmp_snooping multicast_vlan
Used to view
multicast VLAN information.
Purpose
sho
w igmp_snooping multicast_vlan {<vlan_name 32>}
Syntax
This
command is used to display multicast VLAN information.
Description
Parameters
<vlan_name 32> The name of the multicast VLAN to be shown.
If no parameters are specified, the system will display all
multicast VLANs on the Switch.
Non
e.
Restrictions