D-Link xStack DES-3200 Series - Page 354

xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Manual
34
9
DES-3200-28:4# delete mcast_filter_profile profile_id 3
Command: delete mcast_filter_profile profile_id 3
Success.
DES-3200-28:4#
delete mcast_filter_profile
Used to delet
e a multicast address profile.
Purpose
delete
mcast_filter_profile profile_name <name 1-32>
Syntax
This
command is used to delete a multicast address profile.
Description
profile_
name – Name of the profile.
Parameters
Only Administrator-level users
can issue this command.
Restrictions
Example usage:
To delete a multicast range profile with the profile name “shipping”:
DES-3200-28:4# delete mcast_filter_profile profile_name shipping
Command: delete mcast_filter_profile profile_name shipping
Success.
DES-3200-28:4#
show mcast_filter_profile
Used to displ
ay the defined multicast address profiles.
Purpose
sho
w mcast_filter_profile {profile_id <value 1-24>| profile_name
<name 1-32> }
Syntax
This
command is used to display the defined multicast address
profiles.
Description
profile_
name – Specifies to display a profile based on a profile
name.
Parameters
profile_id – ID of the profile.
If not specified, all profiles will be displayed.
Non
e.
Restrictions
Example usage:
To display the multicast filter profile: