xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Manual
35
5
Command Parameters
show lldp statistics
show lldp statistics ports
{<portlist>}
Each command is listed, in detail, in the following sections:
enable lldp
Used to ena
ble LLDP operations on the Switch.
Purpose
enabl
e lldp
Syntax
This
command is used for global control of the LLDP function.
Description
When this function is enabled, the Switch can start to transmit LLDP
packets and receive and process the LLDP packets.
The specific function of each port will depend on the per port LLDP
setting. For the advertisement of LLDP packets, the Switch announces
the information to its neighbor through ports. For the receiving of LLDP
packets, the Switch will learn the information from the LLDP packets
advertised from the neighbor in the neighbor table.
The default state for LLDP is disabled.
Non
e.
Parameters
Only Administrator-level users
can issue this command.
Restrictions
Example usage
To enable LLDP:
DES-3200-28:4# enable lldp
Command: enable lldp
Success.
DES-3200-28:4#
disable lldp
Used to disab
le LLDP operation on the Switch.
Purpose
disa
ble lldp
Syntax
This
command is used to stop the sending and receiving of LLDP
advertisement packets.
Description
Non
e.
Parameters
Only Administrator-level users
can issue this command.
Restrictions
Example usage
To disable LLDP:
To Next Page
Loading...
Need help?
General
