D-Link xStack DES-3200 Series - Page 375

xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Manual
37
0
DES-3200-28:4# show lldp local_ports 1 mode brief
Command: show lldp local_ports 1 mode brief
Port ID : 1
---------------------------------------------------------
Port ID Subtype : Local
Port ID : 1/1
Port Description : RMON Port 1 on Unit 1
DES-3200-28:4#
show lldp remote_ports
Used to displ
ay the information learned from the neighbor.
Purpose
sho
w lldp remote_ports {<portlist>} [brief | normal | detailed]
Syntax
This
command is used to display the information learned from the
neighbor parameters.
Description
A maximum of 32 VLAN Name entries and 10 Management Address
entries can be received.
<po
rtlist> - Specify a range of ports to be configured.
Parameters
When a port list is not specified, information for all ports will be displayed.
brief - Display the information in brief mode.
normal - Display the information in normal mode. This is the default
display mode.
detailed - Display the information in detailed mode.
Non
e.
Restrictions
Example usage
To display remote table entries in brief mode: