D-Link xStack DES-3200 Series User Manual

xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Manual
37
9
enable dos_prevention trap_log
Used to ena
ble a DoS prevention trap/log.
Purpose
enabl
e dos_prevention trap_log
Syntax
This
command is used to send traps and logs when a DoS attack event
occurs. The event will be logged only when the action is specified as
drop.
Description
Non
e.
Parameters
Only Administrator-level users
can issue this command.
Restrictions
Example usage
To enable a DoS prevention trap/log:
DES-3200-28:4# enable dos_prevention trap_log
Command: enable dos_prevention trap_log
Success.
DES-3200-28:4#
disable dos_prevention trap_log
Used to disab
le a DoS prevention trap/log.
Purpose
disa
ble dos_prevention trap_log
Syntax
This
command is used to disable a DoS prevention trap/log.
Description
Non
e.
Parameters
Only Administrator-level users
can issue this command.
Restrictions
Example usage
To disable a DoS prevention trap/log :
DES-3200-28:4# disable dos_prevention trap_log
Command: disable dos_prevention trap_log
Success.
DES-3200-28:4#

D-Link xStack DES-3200 Series Specifications

General

Managed	Yes
Layer	Layer 2
MAC Address Table Size	8K
Quality of Service (QoS)	802.1p
Security Features	ACL, 802.1X, Port Security
Jumbo Frame Support	Up to 9KB
Dimensions	Varies by model
Weight	Varies by model
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C
Standards Compliance	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z, IEEE 802.3x, IEEE 802.1D, IEEE 802.1w, IEEE 802.1s, IEEE 802.1Q, IEEE 802.1p
Forwarding Rate	13.1 Mpps (48-port)