D-Link xStack DES-3200 Series - Page 418

xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Manual
41
3
show flow_meter
Used to displ
ay the flow-based metering configuration.
Purpose
sho
w flow_meter {profile_id <value 1-512> {access_id <access_id>}}
Syntax
This
command displays the flow meter configuration.
Description
profile_i
d – Specifies the profile ID.
Parameters
access_id – Specifies the access ID.
Non
e.
Restrictions
Example usage:
To display the flow meter information:
DES-3200-28:4# show flow_meter
Command: show flow_meter
Flow Meter information:
------------------------
Profile ID : 1 Access ID : 1 Mode : Single-rate Two-color
Rate: 2000(Kbps) Burst Size:1000(Kbyte)
Actions:
Conform : Permit
Violate : Drop
Profile ID : 1 Access ID : 2 Mode : Single-rate Two-color
Rate: 2000(Kbps) Burst Size:1016(Kbyte)
Actions:
Conform : Permit
Violate : Permit Replace_dscp : 20
Total Flow Meter Entries: 2
DES-3200-28:4#