EasyManua.ls Logo

D-Link xStack DES-3200 Series - Page 427

D-Link xStack DES-3200 Series
531 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Manual
42
2
config mac_based_access_control_local mac
Used to co
nfigure a MAC-based access control local database entry.
Purpose
config ma
c_based_access_control_local mac <macaddr> [vlan <vlan_name 32> |
vlanid <vlanid 1-4094> | clear_vlan ]
Syntax
This
command is used to configure a MAC-based access control local database entry
previously created using the create mac_based_access_control_local command.
Description
mac - Sp
ecify the authenticated host’s MAC address.
Parameters
vlan - Specify the target VLAN by VLAN name. When this host is authorized, the host is
assigned to this VLAN.
vlanid - Specify the target VLAN by VID. When the host is authorized, it is assigned to this
VLAN if the target VLAN exists.
clear_vlan - Clear target VLAN information for specific hosts from the local database.
Only Administrator-level users
can issue this command.
Restrictions
Example usage :
To configure the target VLAN “default” for the MAC-based Access Control local database entry 00-00-00-00-00-01:
DES-3200-28F:4# config mac_based_access_control_local mac 00-00-00-00-00-01 vlan
default
Command: config mac_based_access_control_local mac 00-00-00-00-00-01 vlan default
Success.
DES-3200-28F:4#
delete mac_based_access_control_local
Used to delet
e the local database entry.
Purpose
delete ma
c_based_access_control_local [mac <macaddr> | [vlan <vlan_name 32> |
vlanid <vlanid 1-4094>]
Syntax
This
command is used to delete the local database entry.
Description
mac –
Delete database by this MAC address.
Parameters
vlan – Delete database by this VLAN name.
vlanid – Delete database by this VLAN ID.
Only Administrator-level users
can issue this command.
Restrictions
Example usage
To delete a MAC-based access control local by MAC address:
DES-3200-28:4#delete mac_based_access_control_local mac 00-00-00-00-00-01
Command: delete mac_based_access_control_local mac 00-00-00-00-00-01
Success.
DES-3200-28:4#
To delete a MAC-based access control local by VLAN name:

Table of Contents