D-Link xStack DES-3200 Series - Page 44

xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Manual
39
delete port_security_entry
Used to delet
e a port security entry by MAC address, port number
and VLAN ID.
Purpose
delete po
rt_security_entry vlan_name <vlan_name 32>
mac_address <macaddr> port <auth_port>
Syntax
This
command is used to delete a single, previously learned port
security entry by port, VLAN name, and MAC address.
Description
Parameters
vlan name <vlan_name 32>  Enter the corresponding VLAN name
of the port to delete.
mac_address <macaddr>  Enter the corresponding MAC address,
previously learned by the port, to delete.
port <auth_port>  Enter the port number which has learned the
previously entered MAC address.
Only Administrator-level users
can issue this command.
Restrictions
Example usage:
To delete a port security entry:
DES-3200-28:4#delete port
_
security
_
entry vlan
_
name default mac
_
address
00-01-30-10-2C-C7 port 6
Command: delete port_security_entry vlan_name default mac_address 00-01-
30-10-2C-C7 port 6
Success.
DES-3200-28:4#