D-Link xStack DES-3200 Series User Manual

xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Manual
43
7
upload tech_support_toTFTP
Used to uplo
ad information for assistance from technical support.
Purpose
uploa
d tech_support_toTFTP <ipaddr> <path_filename 64>
Syntax
This
command is used to upload information for assistance from
technical support to a TFTP server.
Description
ipadd
r – Specifes the IP address of the TFTP server.
Parameters
path_filename – Specifes the file path to use to send information for
technical support to a TFTP server.
Only Administrator-level users
can issue this command.
Restrictions
Example usage:
To upload Switch information for technical support:
DES-3200-28:4#upload tech
_
support
_
toTFTP 10.55.47.1
tech_support_20090521.txt
Command: upload tech_support_toTFTP 10.55.47.1 tech_support_20090521.txt
Connecting to server………………Done.
Upload technical support information… Done.
Success.
DES-3200-28:4#

D-Link xStack DES-3200 Series Specifications

General

Managed	Yes
Layer	Layer 2
MAC Address Table Size	8K
Quality of Service (QoS)	802.1p
Security Features	ACL, 802.1X, Port Security
Jumbo Frame Support	Up to 9KB
Dimensions	Varies by model
Weight	Varies by model
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C
Standards Compliance	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z, IEEE 802.3x, IEEE 802.1D, IEEE 802.1w, IEEE 802.1s, IEEE 802.1Q, IEEE 802.1p
Forwarding Rate	13.1 Mpps (48-port)