D-Link xStack DES-3200 Series - Page 446

xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Manual
44
1
config command_history
Used to co
nfigure the command history.
Purpose
config
command_history <value 1-40>
Syntax
This
command is used to configure the command history.
Description
Parameters
<value 1-40>  The number of previously executed commands
maintained in the buffer. Up to 40 of the latest executed
commands may be viewed.
Only Administrator-level users
can issue this command.
Restrictions
Example usage
To configure the command history:
DES-3200-28:4#config command_history 20
Command: config command_history 20
Success.
DES-3200-28:4#
show command_history
Used to displ
ay the command history.
Purpose
sho
w command_history
Syntax
This
command is used to display the command history.
Description
Non
e.
Parameters
Non
e.
Restrictions
Example usage
To display the command history:
DES-3200-28:4#show command_history
Command: show command_history
?
? show
show vlan
show command history
DES-3200-28:4#