D-Link xStack DES-3200 Series - Page 49

xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Manual
44
Command Parameters
create snmp [host <ipaddr> [v1 | v2c | v3 [noauth_nopriv | auth_nopriv | auth_priv]]
<auth_string 32>
delete snmp [host <ipaddr>]
show snmp host {<ipaddr>}
create trusted_host [<ipaddr> | network<network_address>]
delete trusted_host [ipaddr<ipaddr> | network<network_address> | all]
show trusted_host
enable snmp [authenticate_traps | linkchange_traps | traps]
disable snmp [authenticate_traps | linkchange_traps | traps]
disable snmp linkchange_traps
enable snmp linkchange_traps
config snmp linkchange_traps
ports
[all | <portlist>] [enable | disable]
show snmp traps {linkchange_traps { ports <portlist>} }
config snmp system_contact {<sw_contact>}
config snmp system_location {<sw_location>}
config snmp system_name {<sw_name>}
enable rmon
disable rmon
Each command is listed, in detail, in the following sections: