D-Link xStack DES-3200 Series - Page 499

xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Manual
49
4
show per_queue bandwidth_control
Used to displ
ay the configuration settings for per-queue bandwidth control.
Purpose
sho
w per_queue bandwidth_control {<portlist>}
Syntax
Use this com
mand to view the per-queue bandwidth limits set for each port.
Description
Parameters
<portlist>  Specifies a range of ports for which to display the current bandwidth
control configuration.
Non
e.
Restrictions
Example usage
To view the bandwidth control configuration for port number 10:
DES-3200-28F:4# show per_queue bandwidth_control 10
Command: show per_queue bandwidth_control 10
Queue Bandwidth Control Table On Port: 10
Queue Max_Rate (Kbit/sec)
---- ---------------------
0 62500
1 no_limit
2 no_limit
3 no_limit
DES-3200-28F:4#