D-Link xStack DES-3200 Series User Manual

xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Manual
50
8
create nlb multicast_fdb
Used to creat
e an entry for the NLB multicast FDB.
Purpose
cre
ate nlb multicast_fdb [ <vlan_name 32> | vlanid <vlanid 1-4094>] <macaddr>
Syntax
The multicast
NLB FDB is needed in order to match the multicast MAC address and the
egress ports. If the destination MAC address matches the configured NLB multicast FDB
entry, the frame is forwarded directly to the configured egress ports.
Description
<vlan_
name 32> - Specifies the name of the VLAN of the NLB multicast FDB entry being
created.
Parameters
vlanid <vlanid 1-4094> - Specifies the VLAN ID of the NLB multicast FDB entry being
created.
<macaddr> - The MAC address being entered into the NLB Forwarding Data Base.
Only Administrator-level users
can issue this command.
Restrictions
Example usage
To create an NLB multicast FDB entry:
DES-3200-28F:4# create nlb multicast_fdb default 03-bf-01-01-01-01
Command: create nlb multicast_fdb default 03-bf-01-01-01-01
Success.
DES-3200-28F:4#

D-Link xStack DES-3200 Series Specifications

General

Managed	Yes
Layer	Layer 2
MAC Address Table Size	8K
Quality of Service (QoS)	802.1p
Security Features	ACL, 802.1X, Port Security
Jumbo Frame Support	Up to 9KB
Dimensions	Varies by model
Weight	Varies by model
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C
Standards Compliance	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z, IEEE 802.3x, IEEE 802.1D, IEEE 802.1w, IEEE 802.1s, IEEE 802.1Q, IEEE 802.1p
Forwarding Rate	13.1 Mpps (48-port)