D-Link xStack DES-3200 Series

xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Manual
51
7
show filter dhcp_server
Used to displ
ay current DHCP server/client filter list created on the switch.
Purpose
s
how filter dhcp_server
Syntax
This
command is used to display DHCP server/client filter list created on the
switch.
Description
Non
e.
Parameters
Non
e.
Restrictions
Example usage:
To display the DHCP server filter list created on the switch:
DES-3200-28F:4#show filter dhcp_server
Command: show filter dhcp_server
Enabled ports : 1-10
Trap State : Disabled
Log State : Disabled
Illegal_Server_Log_Suppress_Duration : 5 Minutes
Permit DHCP Server/Client Table:
Server IP Address Client MAC address Ports
----------------- ------------------ ----------------
10.254.254.251 00-1A-92-24-80-F1 1-10
DES-3200-28F:4#