D-Link xStack DES-3200 Series User Manual

xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Manual
55
Exam
ple usage:
To create an SNMP group named “sg1:”
DES-3200-28:4#create snmp group sg1 v3 noauth
_
nopriv read
_
view v1 write
_
view
v1 notify_view v1
Command: create snmp group sg1 v3 noauth
_
nopriv read
_
view v1 write
_
view v1
notify_view v1
Success.
DES-3200-28:4#
delete snmp group
Used to rem
ove an SNMP group from the Switch.
Purpose
delete snmp
group <groupname 32>
Syntax
This
command is used to remove an SNMP group from the Switch.
Description
Parameters
<groupname 32>  An alphanumeric name of up to 32 characters that
will identify the SNMP group the new SNMP user will be associated
with.
Only Administrator-level users
can issue this command.
Restrictions
Example usage:
To delete the SNMP group named “sg1”.
DES-3200-28:4#delete snmp group sg1
Command: delete snmp group sg1
Success.
DES-3200-28:4#
show snmp groups
Used to displ
ay the group names of SNMP groups currently configured
on the Switch. The security model, level, and status of each group are
also displayed.
Purpose
s
how snmp groups
Syntax
This
command is used to display the group names of SNMP groups
currently configured on the Switch. The security model, level, and
status of each group are also displayed.
Description
Non
e.
Parameters
Non
e.
Restrictions

D-Link xStack DES-3200 Series Specifications

General

Managed	Yes
Layer	Layer 2
MAC Address Table Size	8K
Quality of Service (QoS)	802.1p
Security Features	ACL, 802.1X, Port Security
Jumbo Frame Support	Up to 9KB
Dimensions	Varies by model
Weight	Varies by model
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C
Standards Compliance	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z, IEEE 802.3x, IEEE 802.1D, IEEE 802.1w, IEEE 802.1s, IEEE 802.1Q, IEEE 802.1p
Forwarding Rate	13.1 Mpps (48-port)