xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Manual
58
delete snmp host
Used to rem
ove a recipient of SNMP traps generated by the Switch’s
SNMP agent.
Purpose
delete snmp [host <i
paddr>]
Syntax
This
command is used to delete a recipient of SNMP traps generated
by the Switch’s SNMP agent.
Description
<ipa
ddr> – The IP address of a remote SNMP manager that will
receive SNMP traps generated by the Switch’s SNMP agent.
Parameters
Only Administrator-level users
can issue this command.
Restrictions
Example usage:
To delete an SNMP host entry:
DES-3200-28:4#delete snmp host 10.48.74.100
Command: delete snmp host 10.48.74.100
Success.
DES-3200-28:4#
show snmp host
Used to displ
ay the recipient of SNMP traps generated by the
Switch’s SNMP agent.
Purpose
sho
w snmp host {<ipaddr>}
Syntax
This
command is used to display the IP addresses and configuration
information of remote SNMP managers that are designated as
recipients of SNMP traps that are generated by the Switch’s SNMP
agent.
Description
Parameters
<ipaddr> The IP address of a remote SNMP manager that will
receive SNMP traps generated by the Switch’s SNMP agent.
Non
e.
Restrictions
Example usage:
To display the currently configured SNMP hosts on the Switch:
DES-3200-28:4#show snmp host
Command: show snmp host
SNMP Host Table
Host IP Address SNMP Version Community Name / SNMPv3 User Name
--------------- --------------- ---------------------------------
10.48.76.23 V3 noauthnopriv initial
10.48.74.100 V2c public
Total Entries : 2
DES-3200-28:4#
To Next Page
Loading...
Need help?
General
